Go-Kart Repair

Copyright (C) 2013 Christopher Roberts

Licensed under the GPL v3 Licence

Description

Designed in OpenSCAD. This is a repair to a Go-Kart's steering wheel, to enable it to be reattached to the steering bolt. This is only suitable for go-karts that have a nut on the end of the steering shaft. This model provides a replacement junction between the steering nut and the steering wheel.

The model has an option of adding strengthening pin holes around the nut (see Credits below). Interestingly, if the pin holes do not protrude from at least one end of the model, the slicing program removes the pinholes entirely.

Status

Complete.

Instructions

  • Edit SCAD file with your preferred parameters, in particular the steering nut size.
  • Compile and export to STL.
  • Slice and print.

Credits

Thank you to Wildseyed Cabrer for suggesting that I do away with the buttresses of v1 and instead design a solid cylinder. Of particular interest was his suggestion to use pinholes around the nut hole, to force the slicing program to add reinforcement; which has now been implemented in this design. Thank you to Andreas Thorn for reminding me to use the $fn = 6 for the chamferring of the nut hole, as I had for the nut hole itself.

NameSizeLast UpdatedActions
imag0530.jpg 213.7 KB5 months, 2 weeks ago77 0
imag0532.jpg 258.8 KB5 months, 2 weeks ago62 0
imag0534.jpg 143.3 KB5 months, 2 weeks ago58 0
licence.md 34.3 KB11 months, 3 weeks ago76 0
readme.md  1.5 KB5 months, 4 weeks ago71 0
gokart-repair.png 27.0 KB11 months, 3 weeks ago63 0
gokart-repair.scad 4.6 KB5 months, 4 weeks ago77 0
gokart-repair.stl 2.8 MB5 months, 4 weeks ago62 0
imag0988.jpg 344.1 KB5 months, 2 weeks ago46 0
imag0989.jpg 319.3 KB5 months, 2 weeks ago34 0
imag0990.jpg  247.9 KB5 months, 2 weeks ago39 0
imag0991.jpg 241.7 KB5 months, 2 weeks ago37 0
imag0992.jpg 320.3 KB5 months, 2 weeks ago50 0
imag0993.jpg 233.3 KB5 months, 2 weeks ago40 0
imag0994.jpg 202.9 KB5 months, 2 weeks ago34 0
imag0995.jpg 323.0 KB5 months, 2 weeks ago47 0